Send us a text

By providing your phone number, you consent to receive transactional/informational text messages (SMS) from Anderson Roofing, powered by Topline Pro. You can unsubscribe at any time by replying STOP. Message and data rates may apply. Message frequency varies.

By submitting this form, you agree to our Terms of Service & Privacy Policy.

3-TAB | ARCHITECTURAL | LUXURY | SHAKE

Shingle Roofing in Portland, OR

Anderson Roofing installs 3-tab, architectural, luxury and wood shingle roofs, and maintains them after the install. Founded in 1952, with fully equipped facilities in Portland and Salem.

  • Since 1952
  • Portland and Salem
  • 24/7 emergency service
Aerial view of a red brick building with a dark grey shingle roof and a dormer
Close-up of a brown shingle roof running up to a metal edge trim on a wood-sided wall
Protection and value

Which shingle roof suits the building?

A shingle roof protects the building and its value, and the right type depends on how much weather the roof takes, how the building is used and the look you want from the street. Anderson Roofing installs four kinds: 3-tab, architectural, luxury or premium, and wood shingles or shakes. Shingles are the one roof system we install on homes as well as commercial buildings.

Over time, sun, wind and rain wear shingles down, and the wear shows up as roof leaks. Regular maintenance catches small problems before they escalate, such as a failed shingle, a poorly flashed joint or a clogged gutter. Replacing a shingle early keeps water out of the deck and out of the building. The four types are compared below, followed by what maintenance covers on a shingle roof in Portland and the surrounding area.

The four types

Four shingle types, side by side

These are the four types Anderson Roofing installs. Each drawing shows the roof edge-on, so you can see how much thickness and shadow the surface carries.

  • Edge profile of a 3-tab shingle roof: a thin, flat, even surface
    Type 01

    3-tab

    • Flat, single-layer strips cut into three tabs give a uniform, even surface.
    • The thinnest of the four profiles, with the least depth and shadow.
  • Edge profile of an architectural shingle roof: laminated layers with stepped shadow lines
    Type 02

    Architectural

    • Laminated layers bonded together create a dimensional surface with stepped shadow lines.
    • More depth than 3-tab, so the roof reads as textured from the street.
  • Edge profile of a luxury shingle roof: a thick, heavy, deeply stepped surface
    Type 03

    Luxury or premium

    • Heavier, thicker construction with deep shadow lines and a pronounced dimensional look.
    • A deep, heavy profile for buildings where the roof is a visible feature.
  • Edge profile of a wood shake roof: split, tapered pieces with an uneven surface
    Type 04

    Wood shingle or shake

    • Split or sawn wood with natural variation in thickness, grain and color.
    • Weathers with exposure, so regular inspection keeps it sound.

To see finished work, browse the Shingle Roofs gallery.

Dark architectural shingle roof with a skylight and roof vents, surrounded by trees
Maintenance checklist

What shingle roof maintenance covers

Maintenance has one job: keep water out of the building and moving away from it. These are the items it comes down to.

On the roof
  • Included
    Shingle replacementWorn or damaged shingles are replaced so water cannot seep in and reach the deck.
  • Included
    Flashing repairImproperly flashed areas are entry points in heavy rain, so they are repaired.
  • Included
    Weather wear checkExposure wears shingles down over time. We look for it before it becomes a leak.
Around the roof
  • Included
    Gutter maintenanceClean gutters send water away from the building and prevent overflow onto siding and foundations.
  • Included
    Roof leak checkWe check for roof leaks, which worn shingles and failed flashing can cause.
  • Included
    Mold and structural damageWater that gets in can lead to mold growth or structural damage, so we check for both.

Not sure which type or what your roof needs? We will look at it.

Get a Free Quote
Two roof photos side by side: a plywood roof deck opened up on the left, a shingle surface up close on the right
Left, a plywood roof deck opened up. Right, a shingle surface up close.
Process

How a shingle roof job runs

  1. Look at the roof

    We inspect the shingles, flashing and gutters, and talk through the weather the roof takes and how the building is used. The estimate is free.

  2. Choose the shingle

    We compare 3-tab, architectural, luxury and wood options against the roof and the look you want, then give you a detailed estimate.

  3. Install, repair, maintain

    Our crews install the new roof or replace the failed shingles, repair flashing at problem areas and check that gutters carry water away. Ongoing roof maintenance and inspections catch the next small problem early.

Where we work

Shingle roofs from our Portland and Salem facilities

A team of 75 works from fully equipped facilities in Portland and Salem. Crews average 10 years with the company, and our foremen have 12 to 30 years in the field.

  • Portland, OR
  • Vancouver, WA
  • Eugene, OR
  • Salem, OR
  • Gresham, OR
  • Hillsboro, OR
  • Beaverton, OR
  • Bend, OR
  • Springfield, OR
  • Boise, ID
  • San Jose, CA
  • Seattle, WA
  • Oregon CCB #293Active. Commercial General Contractor Level 1, first licensed in 1972. Check the Oregon CCB lookup.
  • Public Works Bonded since 2006That bond is why we can bid public work, including schools, campuses and agencies.
  • BBB Accredited, A+Accredited since 2019. See the BBB profile.
  • Certified installerElevate, GAF, Johns Manville, Malarkey, Polyroof, Sika Sarnafil, Siplast, Tremco and Versico.
  • Insurance and bond$1,000,000 liability insurance and an $80,000 commercial surety bond, per the Oregon CCB record.
  • Industry membershipsAGC Oregon Columbia Chapter, NRCA and WSRCA.

Oregon CCB record: no complaints, civil penalties, sanctions or administrative suspensions in the past 10 years, and $0.00 in unpaid claims.

Quotation mark
Highly recommend !!! Very professional, experienced employees. They finished the job in the time they quoted and price was spot on. Jimmy and his crew are awesome !!!!!
David Wallace - Google - Sep 2026 4.9 average across 15 Google reviews
Questions

Shingle roofing questions in Portland

How much does a shingle roof cost in Portland?

The price depends on the shingle type, the size and pitch of the roof, how much old roofing comes off, and what the crew finds in the deck and flashing. We do not quote a range without seeing the building. Anderson Roofing provides free estimates for all roofing services in Portland, so you get a detailed number based on your own roof.

What does shingle roof maintenance include?

Shingle roof maintenance in Portland includes replacing worn or damaged shingles, repairing flashing at improperly flashed areas, and keeping gutters clear so water flows away from the building. We also check for roof leaks and for the mold or structural damage they cause. Catching these items early keeps small problems from escalating into interior repairs.

Where does Anderson Roofing install shingle roofs?

Anderson Roofing installs shingle roofs from fully equipped facilities in Portland and Salem. Our service areas are Portland, Salem, Gresham, Hillsboro, Beaverton, Eugene, Springfield, Bend and Vancouver, WA, along with Boise, ID, Seattle, WA and San Jose, CA. If your building sits just outside those towns, ask whether we can reach it.

Can you help with a shingle roof that is leaking right now?

Yes. Anderson Roofing offers 24/7 emergency service, so an active leak does not have to wait for the next business day. Our office is open Monday to Friday, 7:00am to 5:00pm. Once the water is stopped, we can look at the rest of the roof and tell you whether it needs a repair or a replacement.

Get a free estimate on your shingle roof

Tell us about the building and the roof. We will look at it and give you a detailed estimate at no cost.