Built-Up Roofing in Portland, OR
Anderson Roofing installs built-up roof systems on low-slope and barrel roofs: hot asphalt, torch applied, cold process and self adhered. Multiple waterproof layers give commercial, industrial and institutional buildings long-lasting protection and dependable weather resistance.
- Since 1952Roofing from Portland and Salem
- CCB #293Oregon license, active
- Since 2006Public works bonded
What is a built-up roof?
A built-up roof is a low-slope roof system made of layers. Plies of reinforcing material (organic felts, fiberglass or polyester) are set in inter-ply layers of bitumen (asphalt), then finished with a surface of gravel, mineral surfaced cap sheets or reflective coatings. Because it is built layer upon layer, the protection does not hang on one sheet: each ply backs up the next. Anderson Roofing installs built-up roofs out of Portland and Salem, on low-slope and barrel roofs for commercial, industrial and institutional buildings, using hot asphalt, torch applied, cold process and self adhered methods. We vary the number of plies and the surfacing to suit the building and its exposure. From hot asphalt to an odor free cold process, built-up roofing has withstood the dynamic weather of the Pacific Northwest for decades.
Inside a built-up roof, layer by layer
The redundancy of a built-up system is its strength. Layer upon layer, each ply and each pass of bitumen backs up the ones around it, which gives the roof its extreme durability.
Nothing about the assembly is fixed. The number of plies and the surfacing material can be varied to adapt the system to nearly any environmental or aesthetic concern, so a reflective coating can suit one building and gravel another. We specify the assembly for the roof in front of us.
Four built-up roofing systems we install
Anderson Roofing builds up a roof four ways. The right one depends on the building, so we choose it once the roof has been surveyed.
01Hot asphalt
The traditional built-up roof. Plies of organic felt, fiberglass or polyester go down in inter-ply layers of bitumen (asphalt), finished with gravel, a mineral surfaced cap sheet or a reflective coating.
02Torch applied
A heat-bonded method: membrane sheets are fused to the layer below with a torch as they are rolled out. It is one of the four built-up options Anderson Roofing offers, chosen to suit the roof.
03Cold process
No hot asphalt is used. Cold asphalt emulsions or adhesives go between polyester mats or fiberglass base sheets, then the finish surfacing completes the roof. Solvent free options now exist, with a near odor free application.
04Self adhered
Sheets that carry their own adhesive backing bond to the prepared surface without hot asphalt or an open flame. Another of the four built-up options, specified when the roof calls for it.
Comparing roof types? See Single - Ply Roofs and Fluid Applied Roofs, or browse finished work in the Built - Up Roofs gallery.
How a built-up roof project runs
Four steps, from the first look at your roof to the finished surface.
-
Survey and core sample
We survey the roof and cut core samples to see what is actually on the deck: the existing layers, the insulation and the condition of each.
-
Specify the assembly
From what the survey finds, we set the system (hot asphalt, torch applied, cold process or self adhered), the number of plies and the surfacing.
-
Tear off or recover
Where the old roof has to come off, it is torn off to the deck. Where it can stay, the new system goes over it. The survey decides which.
-
Install and surface
Plies and bitumen go down layer by layer. Gravel, a mineral surfaced cap sheet or a reflective coating then completes the system.
Roof work often touches other trades. Anderson Roofing also handles HVAC, plumbing, electrical and asbestos abatement.
Want a survey of your roof?
Built-up roofing from Portland and Salem
Anderson Roofing, founded in 1952, works from fully equipped facilities in Portland and Salem. For built-up roofing we serve these cities.
- Portland, OR
- Salem, OR
- Vancouver, WA
- Eugene, OR
- Gresham, OR
- Hillsboro, OR
- Beaverton, OR
- Bend, OR
- Springfield, OR
- Boise, ID
- San Jose, CA
- Seattle, WA
Highlighted: our Portland and Salem facilities.
“We used Anderson roofing on major roof tear off and build back with a very high-profile client. While onsite they show nothing but professionalism. There work was clean and complete and the end of each day. They went out of their way to keep our customer happy and dry during the rainy season. I would highly recommend their team.”
Jamie Antis Jr - Google - Aug 2026
/filters:strip_exif()/filters:no_upscale()/media/fd8648b5-72b3-417d-a154-9749bee6f6c3.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/bc82ff8e-693b-4451-989a-ad61cea0b45b.jpeg)
Barrel and low-slope roofs on commercial buildings. More in the Built - Up Roofs gallery.
Oregon CCB #293, active
Commercial General Contractor Level 1. The Oregon CCB record shows no complaints, no civil penalties or sanctions and no administrative suspensions in the past 10 years. Look up the license.
Public works bonded since 2006
That bond is what lets us bid public work for schools, campuses and public agencies.
Certified applicator, extended warranty options
We are a certified installer for nine roofing manufacturers and offer extended warranty options.
Built-up roofing questions, answered
Straight answers on price, scope, service area and timing.
Related services
How much does a built-up roof cost in Portland?
The price depends on the size of the roof, the system you choose (hot asphalt, torch applied, cold process or self adhered), the number of plies, the insulation and the surfacing. Whether the old roof is torn off or recovered also changes it. We price after surveying the roof, and estimates are free.
What is included in a built-up roofing job?
A job starts with a survey and core samples. We then specify the assembly, tear off or recover the old roof, and install the plies, bitumen and finish surfacing. Insulation and the other layers under the membrane are part of that specification. We go through the scope for your roof when we estimate it.
Where do you install built-up roofs?
We work from fully equipped facilities in Portland and Salem. We install built-up roofs in Portland, Salem, Eugene, Springfield, Bend, Gresham, Hillsboro and Beaverton in Oregon, Vancouver and Seattle in Washington, Boise in Idaho and San Jose in California, for commercial, industrial and institutional buildings.
How long does a built-up roofing project take?
Timing depends on the size of the roof, the system, whether the old roof is torn off or recovered, and the weather. We do not guess before the survey. Once we have seen the roof and settled the specification, we give you a schedule. Built-up roofing has a long record in Pacific Northwest weather.
Planning a built-up roof?
Tell us about the building. We survey the roof, specify the assembly and send you a free estimate. Office hours are Monday to Friday, 7:00am to 5:00pm, with 24/7 emergency service.
/filters:strip_exif()/filters:no_upscale()/media/bc82ff8e-693b-4451-989a-ad61cea0b45b.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/e1ec9062-94f6-4083-9f5b-99ec380b1cdc.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/fd8648b5-72b3-417d-a154-9749bee6f6c3.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/f86cafa7-86d3-492f-b8ea-dadbf125cf4a.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/973e51f3-6d80-4252-a949-c25e638026a1.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/cfb98ffb-a556-45aa-97a5-e4961336c9e7.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/7e0b0cbf-3ad8-4374-9abc-87beb93a2490.png)